Printer friendly version of this page. Find a Distributor near you.
Analog 0-10 V Module

Analog I/O 0-10 V Module

BM-A010-122x

The analog 0-10 V I/O module provides two 24-bit inputs and two 16-bit outputs. The I/O modules offer 2500 V r.m.s. isolation, with a wide operating temperature range and Class I Division 2 hazardous location rating, making them ideal for demanding industrial installations.

Connect them to the wireless I/O radios for point-to-point wire replacement applications, or to the RS485 I/O Extension module to add I/O to a Modbus network.

 

Used With:

Wireless I/O Radio Kit

Multi-Point Wireless I/O Radio Kit

Modbus RS485 I/O System

Funcionalidades e Beneficios

  • Easy to use: No software configuration needed
  • Easy to install: Mounts onto a 35 mm DIN rail without any tools
  • Failsafe: User can defines how outputs are failed over when RF or I/O communication is ever lost
  • Number of Inputs: 2 (24-bit Resolution)
  • Number of Outputs: 2 (16-bit Resolution)
  • Isolation Voltage: 2500 V r.m.s.
  • Accuracy: < 0.1% of Full Scale
  • FailSafe Modes: Last known value (Default) or Any value on scale

Especificações

Hardware & System

Specification

Description

DIN Rail Mounting Compatibility

35 mm x 7.5 mm DIN Rail

I/O Module Slave ID Selection

16-Position rotary switch

Built-In Mounting Hardware

Spring-loaded clip-on system

Wire Gauge

Solid / Stranded (AWG) 28-12 gauge

Wire Rating

UL: 300 V RMS, 80 °C and 300 V, 105 °C

CSA: 300 V RMS, 105 °C

Warranty

2-Year limited

²When using more than a 5-Module Combination per Radio, use the Power Budget Calculator to determine maximum I/O Module capacity.

Analog 0-10 V

Specification

Description

Number of Inputs

2 (24-bit Resolution)

Number of Outputs

2 (16-bit Resolution)

Isolation Voltage

2500 V r.m.s.

Signal Range

0 to 10 VDC (10.5 V Max)

Accuracy

< 0.1% of Full Scale

FailSafe Modes

Last Known Value (Def.) or Any value on scale³

AI Input Impedance

40K Ohm

AO Output Impedance

10 Ohm

³Requires Advanced User Interface to set a specific value on Analog I/O Module.

Physical

Specification

Description

Power Consumption

Typical: 40 mA / Max: 45 mA @12 VDC

Packaging Dimensions (WxHxD)

4.8 x 5.1 x 2.8 in / 123 x 129 x 72 mm

Net Dimensions

0.7 x 3.9 x 4.5 in / 17.5 x 99 x 114 mm

Packaging Weight

Single: 0.5 lbs / 227 g

Double: 0.8 lbs / 363 g

Safety & Compliance

Specification

Description

Operational Temperature

-40 °C to 85 °C / -40 °F to 185 °F

Storage Temperature

-20 °C to 85 °C / -4 °F to 185 °F

Humidity

0 to 99 %, Non-condensing

Degree of Protection / Housing Type

IP20 / Plastic

Hazardous Locations Classifications

UL Class I; Division 2 (Zone 2), Pending