Printer friendly version of this page. Find a Distributor near you.
Wireless I/O Radio Kit

Wireless I/O Radio Kit

BM-xx00-RM1K

How many times do you need to get a few points of digital or analog inputs and outputs from point A to point B, but can’t justify the cost of running the wires? The Radio Kit is a replacement for hardwired I/O that is simple to deploy. The Kit requires no programming – just wire strippers and a screwdriver. There is no communication protocol to interpret.

The radios are paired and secured at the factory, so there are no settings or configurations to figure out. It is bi-directional, so digital and analog signals can be sent in both directions between two connected I/O stations. Inputs on one module are simply replicated as outputs on the corresponding module. Our wireless I/O makes use of the unlicensed ISM band at either 868 MHz, 900 MHz, or 2.4 GHz (USA only). The radios can send I/O up to 4 miles for the 900 MHz or 1 mile for the 868 MHz and 2.4 GHz models. Each radio pair can connect up to 16 I/O modules, more than enough for most applications.

I/O Modules

Analog I/O 0-10 V Module

Analog I/O 4-20 mA Module

Digital/Discrete I/O Module

Imagens

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Funcionalidades e Beneficios

  • Save time and money: Eliminates trenching and running conduit / deploys in minutes
  • Easy to use: No software configuration needed
  • Easy to install: Mounts onto a 35 mm DIN rail without any tools
  • Scalable: Supports a multitude of I/O modules per system. See specs for details.
  • Secure: Factory paired, secure radio system keeps network protected from intrusions
  • Failsafe: User can defines how outputs are failed over when RF or I/O communication is ever lost
  • Reduced wiring: Single power termination per station
  • 863 to 870 MHz, 902 to 928 MHz, or 2.4 GHz License-Free ISM Band Frequency
  • 128-bit AES RF security
  •  Controlled local shutdown (ESD) via provided dry contact input

Especificações

Hardware & System 

Specification

Description

Maximum Network Capacity²

Max capacity depends on I/O combination

Power budget calculator: http://psft.com/A5D

DIN Rail Mounting Compatibility

35 mm x 7.5 mm DIN Rail

DataRail™ (Included with Radio Kit)

6.1 in / 156 mm - Supports up five (5) I/O modules, other lengths also available

DataRail Mounting Hardware

4-Claw attachment to 35 mm DIN Rail with end bracket

Built-In Mounting Hardware

Spring-loaded clip-on system

Wire Gauge

Solid / Stranded (AWG) 28-12 gauge

Wire Rating

UL: 300 V RMS, 80 °C and 300 V, 105 °C

CSA: 300 V RMS, 105 °C

Warranty

2-Year limited

²When using more than a 5-Module Combination per Radio, use the Power Budget Calculator to determine maximum I/O Module capacity.

 

Radio

Specification

Description

Frequency

863-870 MHz, 902-928 MHz, or 2.4 GHz License-Free ISM Band

Antenna Connector Type

SMA (Female Connector)

Default Transmit Speed / Update

1 Second

Turbo Tx Speed Based on Number of I/O Modules

1=100 ms, 2 to 3=200 ms, 4=250 ms, 5 to 6=333 ms,

7 to 11=500 ms, 12 to 16=1 second

Outdoor / Line of Sight Max Range
([email protected]/[email protected])

900 MHz: 4 Miles (6.4 km)

868 MHz and 2.4 GHz: Up to 3 miles (5 km)

Indoor / Urban Max Range
([email protected]/[email protected])

900 MHz: 1000 ft (305 m) / 2.4 GHz: 300 ft (90 m)

Maximum Transmit Power
(Adjustable by Software)

868 MHz: 14dBm (25 mW) / 900 MHz: 24 dBm (250 mW)

/ 2.4 GHz: 18 dBm (63 mW)

Receiver Sensitivity

868 and 900 MHz: -101 dBm / 2.4 GHz: -100 dBm

Spread Spectrum

868 and 900 MHz: FHSS / 2.4 GHz DSSS

RF Security

128-bit AES

 

Physical

Specification

Description

Supply Voltage Range

9 to 30 VDC (± 5 %)

Power Consumption

35 mA @ 12 V AVG (10% Duty Cycle)

Kit Packaging Dimensions (WxHxD)

5.5 x 10.1 x 2.8 in / 140 x 257 x 72 mm

Net Dimensions

0.7 x 3.9 x 4.5 in / 17.5 x 99 x 114 mm

Kit Packaging Weight

1.3 lbs / 590 g

Net Weight (Single Radio)

0.3 lbs / 136 g

RF Link Alarm Digital Output

10-Second RF Timeout Trigger (NPN) - User Selectable

I/O Link Alarm Digital Output

I/O Mismatch, Bus or Module Failure (NPN)

RF Link Diagnostics (Left LED)

Green = RF Traffic / Yellow = RF Link Fail

I/O Link Diagnostics (Right LED)

Green = I/O OK, Modules Detected / Red = I/O Link Fail

Reverse Polarity Protection

Yes

Advanced User Interface Features

Test RSSI, Tx Power Adjustment, Force Local Output(s),

Set FailSafe Parameters, and Additional Diagnostics

 

Safety & Compliance

Specification

Description

Operational Temperature

-40 °C to 80 °C / -40 °F to 176 °F

Storage Temperature

-20 °C to 85 °C / -4 °F to 185 °F

Humidity

0 to 99 %, Non-condensing

Degree of Protection / Housing Type

IP20 / Plastic

Hazardous Locations Classifications

UL Class I; Division 2 (Zone 2), Pending

RF Emissions

FCC Part 15/IC

Certificações

CE Mark 297,86 kB Última modificação 07/10/2015
CSA Mark 110,83 kB Última modificação 21/05/2015
Country Approval - Australia 1,04 MB Última modificação 20/10/2015
Country Approval - Colombia 653,42 kB Última modificação 19/10/2016
Country Approval - India 339,37 kB Última modificação 25/06/2015
Country Approval - Kuwait 166,04 kB Última modificação 21/05/2015
Country Approval - Mexico 64,91 kB Última modificação 07/10/2015
Country Approval - Qatar 92,12 kB Última modificação 21/05/2015
Country Approval - Saudi Arabia 400,04 kB Última modificação 21/05/2015
Country Approval - United Arab Emirates 62,09 kB Última modificação 21/05/2015
Country Approval - Peru 536,81 kB Última modificação 06/06/2017
Country Approval - New Zealand 274,60 kB Última modificação 04/08/2017